Gunfighter Mk.III Base (no grip) Open Box

Reminder: Base Only! Joystick Grip Not Included! You need to purchase a grip as well

Important: this is an Open Box item. It means it has been returned back to us by our customer. The item is as new. It has been tested and it is fully functional and complete. Packing might be slightly damaged.

Included Gunfighter Mk.III Base:

• Gunfighter MK.III Base (Rev.B)
• BlackBox Mk2
• Tabletop base plate
• Combo Cams Kit
• 50 cm interface cable
• 180 cm USB 2.0 cable
• Set of springs (10, 20A, 30A, 40A)
• Spring installation tool
• Grip fastener

Hardware:

• Built to Last
• All-metal gimbal w/ adjustable axis dampers
• Swappable cams and springs
• “Avia” cams with progressive loading (soft and hard center)
• “Space” cams with linear loading (soft and hard center)
• Cams made of hardened stainless steel alloy
• Wide stance tabletop base plate
• Blackbox w/ 32-bit ARM MCU active USB 2.0 controller

Features:

• Works with all flight simulations
• No drivers required
• Digital Hi-resolution contactless sensors
• Save and load custom profiles
• Software tunable axes
• Upgradeable firmware via USB interface

NOTE: The clutch dampers may be tightened at the factory to prevent them from loosening during shipping; before you connect your Gunfighter to your PC, you will need to loosen the dampers for both pitch and roll axes to achieve correct return-to-center axes movements after calibration (refer to the Gunfighter Quick Guide for details). 

 

Warranty:

• 2 Years

Compatible Grips:

• VKB MCG Modern Combat/Ultimate Grip (3-pin Rev.B)
• VKB SCG Space Combat Grip (3-pin Rev.B)
• VKB KG12 WWII Combat Grip (3-pin Rev.B)
• VKB F-14 Combat Grip (3-pin Rev.B)

Instructions:

• VKB Official YouTube Channel
• VKB Device Config User Guide

Downloads:

• Please visit the Downloads section to download the required firmware and tools needed to flash and calibrate.