Gunfighter Mk.III Base (no grip)

Reminder: Base Only! Joystick Grip Not Included! If you need to purchase a complete joystick, click here instead.

Included Gunfighter Mk.III Base:

• Gunfighter MK.III Base (Rev.B)
• BlackBox Mk2
• Tabletop base plate
• Combo Cams Kit
• 50 cm interface cable
• 180 cm USB 2.0 cable
• Set of springs (10, 20A, 30A, 40A)
• Spring installation tool
• Grip fastener
• Grip adaptor which makes Thrustmaster Warthog/F16/F18 grips compatible with VKB Gunfighter base (optional, use drop-down menu above)

Hardware:

• Built to Last
• All-metal gimbal w/ adjustable axis dampers
• Swappable cams and springs
• “Avia” cams with progressive loading (soft and hard center)
• “Space” cams with linear loading (soft and hard center)
• Cams made of hardened stainless steel alloy
• Wide stance tabletop base plate
• Blackbox w/ 32-bit ARM MCU active USB 2.0 controller

Features:

• Works with all flight simulations
• No drivers required
• Digital Hi-resolution contactless sensors
• Save and load custom profiles
• Software tunable axes
• Upgradeable firmware via USB interface

NOTE: The clutch dampers may be tightened at the factory to prevent them from loosening during shipping; before you connect your Gunfighter to your PC, you will need to loosen the dampers for both pitch and roll axes to achieve correct return-to-center axes movements after calibration (refer to the Gunfighter Quick Guide for details). 

Warranty:

• 2 Years

Compatible Grips:

• VKB MCG Modern Combat/Ultimate Grip (3-pin Rev.B)
• VKB SCG Space Combat Grip (3-pin Rev.B)
• VKB KG12 WWII Combat Grip (3-pin Rev.B)
• VKB F-14 Combat Grip (3-pin Rev.B)

Instructions:

• VKB Official YouTube Channel
• VKB Device Config User Guide

Downloads:

• Please visit the Downloads section to download the required firmware and tools needed to flash and calibrate.